|
|
Build Your Online Product Catalogs?
| Product Name: |
Flattened Expanded Metal
|
| Supply Ability: |
|
| Related proudcts |
flattened expanded m, |
| Specifications |
Expanded Metal |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
|
| Unit Price: |
|
|
Flattened expanded metal is manufactured by passing the metal through a cold roll reducing mill parallel to the LWD. It is Standard Expanded Metal that has been rolled through a flattening machine in the expanding process. By flattening the sheet, the bonds and strands are turned down to produce a smooth and flat surface �essentially elongating the LWD of the diamond.
1. Camber- The greatest deviation of a side of edge from a straight line after flattening shall not exceed 3/32 inch per foot (0.8mm per 100mm) of dimension.
2. Thickness- shall not be less than 70% of the nominal thickness specified for the sheet from the item produced.
3. Squareness- Ends shall not be more than 1/8 inch per foot (1 mm per 100 mm) out of square or 1/2 inch (12.7mm) overall.
4. Flatness(Levelness) �Sheets shall be free from waves or buckles that are in excess of 1-1/2 inch (38.1mm) from a plane surface.
|
| Company: |
Anping Glory Expanded Metal Factory
|
| Contact: |
Ms. Juan Zhu |
| Address: |
99 Heping steet, Anping, Hebei, China |
| Postcode: |
053600 |
| Tel: |
86-318-5821607 |
| Fax: |
86-318-5821607 |
| E-mail: |
|
|
|
|
Home
